| With this clever and
innovating tool, you can auto correct embroidery errors and
negligence, that happen during punching a design. Features
like unnecessary trims, forgotten trims, Fix/Lock additions
or removals, are no more subjects to take time to correct.
With simple tick boxes you can modify the whole design or the
selected parts. |
| |
| Cleanup Expert modifications can
be done in four steps: |
1.
Fixing and locking - options:
|
 |
This step of Clean-up
expert tool is separated in two parts.
The first part has to do with the fixing stitches placed at
the beginning of the objects and the second part has to do
with the locking stitches placed at the end of the objects. |
| Fixing
stitches |
•
|
Fix if there is a thread
trim before an object: By enabling this parameter you can add fixing
stitches, if there is a thread trim function at the beginning
of the objects. |
• |
Fix if previous connection
is long:
By enabling this parameter you can add fixing stitches, if
there is a long stitch connecting the current object with the
previous one. |
• |
Remove fixing stitches on
short connections: By enabling this parameter you can delete the unnecessary
fixing stitches on the short-distanced objects |
• |
Fix all objects: By enabling this
parameter you can add fixing stitches to the whole design or
the selected objects. |
| Locking stitches |
• |
Lock if there is a thread
trim following: By enabling this parameter you can add
locking stitches, if there is a thread trim function at the end
of the objects. |
• |
Lock if next connection
is long: By enabling this parameter you can add
locking stitches, if there is a long stitch connecting the
current object with the next one. |
• |
Remove locking stitches
on short connections: By enabling this parameter
you can delete the unnecessary locking stitches on the short-distanced
objects. |
• |
Lock all objects:
By enabling this parameter you can add locking stitches to
the
whole design or the selected objects. |
| |
|
2. Special
Functions - options:
|
|
| This step has four
options and refers on adding or removing thread trims on
the design or the selected objects. |
•
|
Add trims between long connections:
With this parameter you can force the program to add trims
between
long distance objects |
•
|
Remove trims on short connections:
With this parameter you can remove the thread trims between
short distance objects. |
• |
Remove unnecessary trims:
With this parameter you can delete the thread trims between
objects
where the trim is not needed. This error occurs when you rearrange
the sequence of the objects. |
• |
Add trims between all objects:
By enabling this parameter you can add thread trims to the
objects of the whole design or the selected objects |
| |
|
3. Start
- End Points - options:
|
|
This step of Clean-up
expert tool is separated in two parts.
The first part changes the position of the entry points of
the objects and the second part changes the position of the
exit points of the objects. |
| Start points: |
•
|
Change the start of the
object, after trims, to "Auto": By enabling
this parameter you can remove the user defined start points of
an object, when thread trim function exists at the beginning
of the object. |
•
|
Change all object start-points
to "Auto": By enabling this parameter you
can remove the user inserted start points of the objects and
let the program determine the starts of each object. |
| End points: |
•
|
Change the end of the object,
before trims, to "Auto": By enabling this
parameter you can remove the user defined exit points of an object,
when
thread trim function exists at the end of the object. |
•
|
Move end points to "Closest
connection": By enabling this parameter you can
remove the user inserted exit points of the objects and let the
program determine the exit of each object accordingly to the
position of the next one. |
| |
4. Rule
Parameters - options:
|
|
•
|
Short connection is below
a defined number: On this numeric input you determine
the value in mm, under which a stitch length will be considered
as short. |
•
|
Process selected object:
If this parameter is enabled, the rules that have been specified
in the previous steps, will take effect only on the selected
objects. |
•
|
Preview list of operations:
In this area, you can preview the modifications that will be
applied by clean-up expert on the design. |
| |
|
This
module can help you optimize your embroidery designs saving
you time and money! |
