| Running module™ parameters: |
 |
| |
|
Running parameters
for existing punching objects: |
| |
 |
| |
With Running stitch type you can add a
series of running stitches. In this case, a smooth curve connects
the nodes that you are adding. |
| |
The parameters that you can change in
this type of punching are: |
| |
- Repeats of the outline.
- Offset of the stitches according to the outline.
- Random length of stitches
|
| |
|
|
Repeats: |
| |
In this parameter you can specify
the repeats of the punching object that you are adding. |
| |
|
|
Offset: |
| |
With this parameter you can specify
the distance between punched curve and the position of the stitches
in millimetres. |
| |
|
|
Random: |
| |
With this parameter you can specify
the percentage of stitch randomness in a selected or new punching
object. For example if you specify 20% random and the stitch length
is 4 mm, all the stitches in this object will be between 3.2 and
4mm. Even if you are using the random parameter, the maximum stitch
will not be longer than the stitch length that you have specified. |
| |
|
|
|
|
