| Editing
Plus tools: |
 |
| |
|
| |
Transform selected
objects by creating copy or not: |
| |
You can duplicate any
object or the entire design and make any transformations you
want. |
| |
|
| |
Move selected
object with mouse or with specific number input: |
| |
You can move any selected object
with the mouse or by entering specific values with accuracy
of millimeters. Useful tool for keeping specific distances
between objects. |
| |
|
| |
Rotate selected
objects: |
| |
You can rotate selected objects
clockwise or anti-clockwise by simply specifying the number
of degrees! |
| |
|
| |
Scale selected objects,
proportional or not |
| |
With the scaling functionality
that is included you can change the size of the selected object(s)
or all the current design.
More specifically, you can scale the selected object(s) as a percentage of the
current size by increasing or decreasing it. Also, you can scale the selected
object(s) by specifying the size.
The above scaling abilities can be applied proportionally. Proportional scaling
option gives you the opportunity to change the size of the selected object(s)
by keeping the same analog between the horizontal and the vertical size of them.
Therefore when the “Proportional scaling” parameter is on, and one
of the dimensions of the selected objects is changed, automatically the other
dimension will be changed with the same percentage. |
| |
|
| |
Mirror the selected
objects Horizontal or Vertical: |
| |
You can mirror any object
by using the mouse or by specifying the axis you want to be
based the mirroring. |
| |
|
| |
Move multiple
stitches by specifying the first and the last one: |
| |
You can move multiple stitches by
specifying the first and the last stitch. The stitches inside
those to points can be moved proportional or separately in
different directions. |
| |
|
| |
Reset of density
counter: |
| |
With this tool you can change the
number of stitches contained in the selected object(s). If
you haven't selected anything, then the change will be applied
to the whole design. |
| |
|
| |
Convert Step
to Satin: |
| |
With this tool ,
you can convert a step object to satin. It is an auto conversion
tool that can help you change parts of existing designs from
step to satin. |
| |
|
| |
Edit Step patterns: |
| |
Using this option, you can change
a step pattern or convert a satin object to step. This option
changes the step or the satin of the selected objects, or the
entire design if no objects are selected.
The parameters you have to specify in this option are: |
| |
- The type of the step that you want
to use.
- The length of the step.
- Which part will be calculated.
|
| |
|
| |
Align the
selected objects horizontally: |
| |
You can align the selected objects
horizontally in the following positions: |
| |
 |
The object(s) will be aligned based
on their left side. |
| |
 |
The object(s) will be aligned based on their
horizontal center. |
| |
 |
The object(s) will be aligned based on their
right side. |
| |
|
|
| |
Align the selected object
vertical: |
| |
You can align the selected
objects vertically in the following positions: |
| |
 |
The object(s) will be aligned based
on their topside. |
| |
 |
The object(s) will be aligned based
on their vertical center. |
| |
 |
The object(s) will be aligned based
on their bottomside. |
| |
|
|
 |
Reverse Stitches
of the selected Stitch data objects: |
| |
With this tool you can reverse the
way that the design will be embroidered. |
| |
|
 |
Smooth the Stitch
data objects. Corrects density problems or stitches
that are out of the shape. |
| |
With this tool you can make automatic
corrections on the selected objects or the whole design.
This tool erases nodes
that are not needed. The way that the filter will be applied
on
the selected objects dependents on the value of "Tolerance" that
you can specify. |
| |
|
 |
Split the Stitch
data objects by specifying lines: |
| |
By clicking on a point and then
to another, the split objects tool, splits all the stitches
that are passing under the line specified by the two points. |
| |
|
| |
Create copy
of the selected objects by reference line: |
| |
You can create a copy of the design
by specifying a reference line. This tool is useful when you
want to copy a design and at the same time placed in another
position of the design area rotated, enlarged or shrunk. |
| |
|
| R |
Repeat the last
made modification: |
| |
With this option you
can repeat the last change you have made in the current design. |
| |
|
| |
Specify if the
copies of the objects will be placed at the end or after
the original: |
| |
With this tool active the program
transfers you instantly at the end of the design. There you
can create or place a new object(s) or place a copy of an existing
one. |
| |
|
| Active
designs modifications: |
|
| |
| his is a supportive tool where you
can view all the designs that are currently open in the program
and some extra functionality: |
• |
Print the selected designs
one by one or like catalogue. |
• |
Save the selected design
in the hard disk by changing their location or their format. |
• |
Write the selected designs
in machine disk. Format command is available in case it is
needed. |
• |
Close all the selected
designs at once. |
• |
3D preview of the selected
objects. |
| |
